Welcome to Shipping Cases, Custom Cases, Carrying Cases, Tool Cases | Cases By Source. Skip directly to: main content, navigation, search box.

24" Roto Shock Racks

These Industrial Roto Shock Rack cases from SKB have a completely redesigned frame with threaded steel rails and aluminum cross components that form a rigid "H"-shaped configuration. The cases feature a compound hinge system and field replaceable latches that allow the lid to swing completely around to lie flat against the main body of the case. As an alternative, you can go lid-less with an effortless lift motion, reinstalling in seconds with the same ease.

The front and rear lids are designed to protrude into the base of the case approximately 1"; their unique double-wall structure makes them incredibly stiff where this intersection occurs. This new generation of shock racks is engineered to offer MIL-SPEC sealing characteristics with significantly fewer latches than most Roto Shock Racks. This allows for rapid deployment in an up-right configuration — even when the cases are stacked. The standard front-to-rear rail depth is 24" and each lid is 4" deep. The new SKB shock-rack system stacks securely with the wheels on or off, and this revolutionary design is also the only rackmount that will open front and back while stacked.

To stand behind the product, these rack cases come with the “Million Mile Guaranty” - you break it…SKB replaces it, for free, for life.


L:
W:
H:

sizes


loading... Displaying 1 to 6 of 6 results for "24" Roto Shock Racks"
  1. Part No.
    Description
    Length
    Width
    Height
    Price
  2. 3SKB-R906U24

    6U SKB Roto Shock Rack Case (24 RD)

    19” 
    24” 
    10.5” 
    $1,059.99
  3. 3SKB-R908U24

    8U SKB Roto Shock Rack Case (24 RD)

    19” 
    24” 
    14” 
    $1,159.99
  4. 3SKB-R910U24

    10U SKB Roto Shock Rack Case (24 RD)

    19” 
    24” 
    17.75” 
    $1,224.99
  5. 3SKB-R912U24

    12U SKB Roto Shock Rack Case (24 RD)

    19” 
    24” 
    20” 
    $1,314.99
  6. 3SKB-R914U24

    14U SKB Roto Shock Rack Case (24 RD)

    19” 
    24” 
    24.5” 
    $1,544.99
  7. 3SKB-R916U24

    16U SKB Roto Shock Rack Case (24 RD)

    19” 
    24” 
    28” 
    $1,629.99


Case Study:Dental Display Case

Dental Display Case
The Challenge
Representatives from a well-respected dental company found Source’s exhibit at an industry trade show. They were looking to develop an updated, dynamic and sophisticated presentation for their traditional instrumentation. The innovative tools and accessories they brought to the exhibition had been presented on a sheath of black velvet draped over a flat surface; the display didn’t make the impact they were aiming for, nor did it highlight the time-honored company’s achievements.

The Response
Considering the client’s aesthetic and functional needs, we recommended a modular system of custom wood cases outfitted with foam inserts to highlight their products’ style and diversity. Cases By Source’s wood cases have a sophisticated and polished look that provides an excellent solution for a wide range of products. The cases not only make an elegant, reusable presentation, but also offer organization and protection. Custom interiors are fabricated from wood, plastic, fabric or foam. Logos can be silk screened or laser burned, and interiors can be customized from routed wood or die-cut foam, or lined with satin or velvet.

The Solution
The client sent us tools for measurement and a set of marked photographs and layout instructions to ensure the most professionally sensible arrangement in the case’s interior. The tools were separated into three categories—slow, high speed, and accessories— each of which needed its own case. We modeled the solutions in our 3-D CAD design software, and then manufactured a series of maple wood cases with a cherry stain and lacquered finish. The top edge of the case was routed for a lift-off lid that fits into the recess, and the interior was customized with a die-cut cross-linked foam insert. Each cavity was layered to a carefully measured height so all components would rest on the same level, and we also added holes in the bottom for dowels, enabling the client to tilt the displays for better viewing angles and a more dynamic presentation.