Welcome to Shipping Cases, Custom Cases, Carrying Cases, Tool Cases | Cases By Source. Skip directly to: main content, navigation, search box.

Aquapac

Protect your phone, digital camera, camcorder, or PDA when working or playing near sand and water with Aquapac waterproof cases.

Aquapac is a unique, patented brand of 100% waterproof cases for your personal electronics, communications equipment, cameras, and valuables. Constructed of tough, 100% waterproof vinyl, Aquapac cases offer more reliable protection against sand and water than the average watertight bag. The Aquapac waterproof cases are used by the Navy, offshore drilling rigs, lifeguards, film crews, and recreational boaters.

The Aquaclip—an amazing little device which seals the case with a simple twist of a lever—is the key. Much like a sandwich bag closure, a “V”-shaped tongue and groove system works to fully enclose and protect your valuables: When turned, the levers on the male half of the “V” run up a ramp on the female half, squeezing the two together. The pressure’s just strong enough to completely and hermetically seal the package, but not damage or compromise the soft plastic case material. The sealing system is attached to the case by a pair of ‘flexible clips’ that bind the case together as a single unit—even when open. No loose screws. No need to fold the end of the case. Simple! Reliable!

Browse the following Aquapac categories:

L:
W:
H:

sizes


loading... Displaying 1 to 22 of 22 results for "Aquapac"
  1. Part No.
    Description
    Length
    Width
    Height
    Price
  2. 3SKB-R06U20W-CS

    6U SKB Rolling Roto Shock Rack Case (20 RD)

    19” 
    20” 
    10.5” 
    $459.99
  3. AQUA-104

    Aquapac Phone (iPhone) / GPS Case

     
     
     
    $30.00
  4. AQUA-404

    Aquapac Mini Camera Case

     
     
     
    $35.00
  5. AQUA-604

    Aquapac Floating Keymaster Case

     
     
     
    $20.00
  6. AQUA-225

    Aquapac Small PRO VHF Case

     
     
     
    $60.00
  7. AQUA-445

    Aquapac Large Zoom Compact Camera Case

     
     
     
    $50.00
  8. AQUA-664

    Aquapac Large Multi-Purpose Protective Case

     
     
     
    $45.00
  9. AQUA-364

    Aquapac Large PDA Case

     
     
     
    $35.00
  10. AQUA-554

    Aquapac Connected Electronics Case

     
     
     
    $90.00
  11. AQUA-154

    Aquapac Radio Microphone Case

     
     
     
    $65.00
  12. AQUA-212

    Aquapac Large Armband Case

     
     
     
    $45.00
  13. AQUA-420

    Aquapac Point & Shoot Zoom Camera Case with Hard Lens

     
     
     
    $55.00
  14. AQUA-654

    Aquapac Small Multi-Purpose Protective Case

     
     
     
    $28.00
  15. AQUA-344

    Aquapac Small PDA Case

     
     
     
    $30.00
  16. AQUA-465

    Aquapac Barrel Camcorder Case with Hard Lens

     
     
     
    $130.00
  17. AQUA-748

    Aquapac Seti Case

     
     
     
    $70.00
  18. AQUA-210

    Aquapac Small Armband Case

     
     
     
    $45.00
  19. AQUA-414

    Aquapac Point & Shoot No Zoom Camera Case

     
     
     
    $40.00
  20. AQUA-644

    Aquapac Mini Multi-Purpose Protective Case

     
     
     
    $27.00
  21. AQUA-245

    Aquapac Large PRO VHF Case

     
     
     
    $60.00
  22. AQUA-455

    Aquapac SLR Camera Case with Hard Lens

     
     
     
    $130.00
  23. AQUA-674

    Aquapac Jumbo Multi-Purpose Protective Case

     
     
     
    $50.00


Case Study:Dental Display Case

Dental Display Case
The Challenge
Representatives from a well-respected dental company found Source’s exhibit at an industry trade show. They were looking to develop an updated, dynamic and sophisticated presentation for their traditional instrumentation. The innovative tools and accessories they brought to the exhibition had been presented on a sheath of black velvet draped over a flat surface; the display didn’t make the impact they were aiming for, nor did it highlight the time-honored company’s achievements.

The Response
Considering the client’s aesthetic and functional needs, we recommended a modular system of custom wood cases outfitted with foam inserts to highlight their products’ style and diversity. Cases By Source’s wood cases have a sophisticated and polished look that provides an excellent solution for a wide range of products. The cases not only make an elegant, reusable presentation, but also offer organization and protection. Custom interiors are fabricated from wood, plastic, fabric or foam. Logos can be silk screened or laser burned, and interiors can be customized from routed wood or die-cut foam, or lined with satin or velvet.

The Solution
The client sent us tools for measurement and a set of marked photographs and layout instructions to ensure the most professionally sensible arrangement in the case’s interior. The tools were separated into three categories—slow, high speed, and accessories— each of which needed its own case. We modeled the solutions in our 3-D CAD design software, and then manufactured a series of maple wood cases with a cherry stain and lacquered finish. The top edge of the case was routed for a lift-off lid that fits into the recess, and the interior was customized with a die-cut cross-linked foam insert. Each cavity was layered to a carefully measured height so all components would rest on the same level, and we also added holes in the bottom for dowels, enabling the client to tilt the displays for better viewing angles and a more dynamic presentation.